IP Phone LP-801
 

Introduction

LP801 is an SIP based IP Phone which supports 2 accounts to
register to different SIP servers. It is suitable for Telco company
to provide VoIP Call or VoIP Telephony company to provide VoIP
Call from personnel user, or IP Centrex Phone for business
users. It also supports TR069 auto provision protocol which
enable VoIP Service provider to provision, change configuration
or update firmware at LP801 remotely. Support two Line accounts
to select a VoIP call through different VoIP Service providers to
make your most benefits.

Graphical and Bilingual operation

An easy understanding graphical keypad and Bilingual 128 x 64 pixels LCD display with
Navigation keys guide you to the user friendly design IP Phone. No need sophisticated user
manual and dial rule, you are able to make a call to improve your working efficiency and surf
your call via IP network freely.
 

Dual Mode: IP Phone and Single line phone

LP801AP is not only an SIP based IP Phone, but an analog single line telephone set. You are
able to make IP Call or Analog phone line call in the same LP801AP or LP801P Phone set. Just
pick up handset or speaker to answer incoming call no matter it is an IP call or single RJ11 call.
Besides, LP801AP or LP801P is an regular analog phone set if city power is failure or network is
disconnection. It permits to make call and receive RJ11 line incoming call when power is failure.

Specification

• IP Network Connection
  • IPv4 (RFC 791)
  • MAC Address (IEEE 802.3)
  • Static IP
  • DHCP Client (RFC 2131)
  • PPPoE Client (RFC 2516)
  • DNS Client
  • STUN Client
  • TCP/UDP (RFC 793/768)
  • RTP/RTCP (RFC 1889/1890)
  • ARP/ARCP
  • ICMP (RFC 792)
  • SNTP (RFC 2030)
  • TFTP Client
  • Telnet Server
  • HTTP Server
  • QoS: DiffServ (RFC 2475)
  • Support 802.1Q/801.1P VLAN
• IP Telephony (VoIP)
  • SIPv2 (RFC 3261)
  • Support 2 SIP accounts at two separated SIP Servers
  • Support Outbound proxy server
  • MD5 Digest Authentication
  • SIPv2 RFC 2976 (SIP Info)
  • RFC 3515 (Refer)
  • Support SIP Trunk Mode
  • Support IETF RFC 4028 Session Timer
  • Support IETF RFC 3323 /RFC 3325 Privacy
  • Reliability of provisional responses PRACK (RFC3262)
  • Early/Delay media support
  • Offer/Answer (RFC3264)
  • Message Waiting Indication (RFC3842)
  • Event Notification (RFC3265)
  • REFER (RFC3515)
  • Support DNS SRV to locate SIP Server (RFC 3263)
• Voice Codecs
  • G.711 (a-Law/u-Law), G.723.1, G.729, G.729A
  • DTMF: In-band, Out-of-band (RFC 2833), and SIP-Info
  • VAD – Voice Activity Detection
  • CNG – Comfortable Noise Generation
  • Silence Suppression
  • Support Jitter Buffer
  • Support Acoustic Echo Cancellation
  • Adjustable Voice Volume
• Call Features
  • Call Hold / Music on Hold
  • Call Waiting
  • Call Transfer
  • Call Forward (Unconditional / No Answer / Busy)
  • 3-Way Conference
  • Mute
  • Redial
  • Call Records
  • Phone Book
  • Speed Dial
  • Miss Call Display
  • Support Distinct Music Ring
  • Support Dial Plan
  • Prefix Routing Plan
  • Digit Manipulation
• Management
  • Bilingual Web User Interface ( English and Chinese )
  • Telnet CLI
  • 2 Levels of User Access Authority with Password protection
  • Provides System Status
  • Configuration Backup/Restore
  • Reset to Default
  • Dual Firmware image to restore in case of upgrading failure
  • Support HTTP Provision through MAC address
  • Support TR069 Provision Server
• Physical Interface
  • Three steps of View angle on desktop
  • Ethernet port (RJ-45, 10/100 base-T)
    • 1-LAN port, for connect to Router, ADSL/Cable modem, and Leased Line
    • 1-PC port, for connect with PC or other network devices
    • Built-in 10/100BaseT Ethernet Switch
  • IEEE 802.3af Power over Ethernet at LAN port ( LP801A, LP801AP Only)
  • Handset Jack (RJ-10)
  • 3.5 mm Earphone and Microphone Jack
  • DC +12V power input Jack
  • LCD Display:
    • Display Format: 128 x 64 pixels graphical
    • View Size: 75.5(W) x 52 (H) mm
    • LCD Type: FSTN
    • Language: Both Traditional Chinese and English
  • LCD Back-light (White Light)
  • Grapchic Status Icons Display
• Environment
  • Dimension: 200(W)*95(H)*230(D) mm, Desktop
  • Weight: 1.0Kg ( single unit with packing )
• Operating Temp. & Humidity
  • Temp.: 0°C to 45°C (32°F to 113°F)
  • Humidity: 10% to 90% relative humidity, non-condensing
• AC Power Adaptor:
  • INPUT: AC 100~240V, 50/60Hz
  • OUTPUT: DC +12V, 1.0A
  • Power over Ethernet : 4 Watts at LAN port only
  • Approvals: FCC (Part 15, Class B), CE, LVD and RoHS
• Country of origin:
  • Made in Taiwan
• Packing Accessories
  • LP801 IP Phone x 1 set
  • AC to DC+12V/1A Power Adaptor x 1 pcs
  • CD ROM User Manual
• Warranty
  • One year

Ordering Information

Note : Only both LP801 and LP801A are available to deliver at this moment. Other two models,
LP801P and LP801AP plan to release in Q2-2010. Please contact Welltech Salesperson,
Distributor or reseller in details.